1x2 Wine Rack
Very simple plan to build a wine rack out of 1x2s. This wine rack can be fit inside cabinets, and can be flipped. 1x2s are inexpensive and easy to work with. This build should cost less than $5 to build. from
Specifications
| Project type | Pantry Organization |
|---|---|
| Room | dining room |
| Difficulty | Beginner Projects |
Dimensions
Use the size-specific shopping and cut lists below.
Shopping List
2 - 1x2 @ 8 feet long (can be furring strips)
1-1/4" long brad nails
Cut List
16 - 1x2 @ 10" long
Tools
- measuring tape
- pencil
- safety glasses
- circular saw
- nailer
- sander
Step-by-step Instructions
Step 1
Build two of the wine holder trays as shown.
Step 2
Attach legs to the two trays to make the wine rack
Finishing
Sand all surfaces, starting with a medium grit and finishing with fine. Wipe off the dust, fill any holes or gaps with wood filler, and sand smooth once dry. Apply primer if you're painting, then finish with your choice of paint or stain and seal with a durable clear topcoat. For outdoor projects, use exterior-rated primer, paint or stain, and sealer so the piece stands up to the weather.
Source (temporary): https://www.ana-white.com/woodworking-projects/1x2-wine-rack-plans