1x3 Blanket Ladder
Here's the easiest blanket ladder tutorial ever! You'll just need some 1x3 furring strips and a drill to assemble - no pocket holes, no nails. Step by step plans with diagrams and shopping/cut lists from
Specifications
| Project type | Other Projects |
|---|---|
| Room | Bedroom |
| Difficulty | Starter Projects |
Dimensions
Use the size-specific shopping and cut lists below.
Shopping List
3 - 1x3 furring strips, 8 feet long
20 - 1-1/2 long self tapping star bit screws like these, or 1-1/4" brad nails and glue
Cut List
2 - 1x3 @ 72"
5 - 1x3 @ 16"
Tools
- measuring tape
- safety glasses
- drill
- circular saw
Step-by-step Instructions
Mark out the placement of the ladder rungs as shown.
Attach the rungs to the sides with the screws or nails. Elevate up on scrap wood pieces as shown. If the screws are splitting the wood, try predrilling holes with a wood drilling bit before screwing.
Finishing
Sand all surfaces, starting with a medium grit and finishing with fine. Wipe off the dust, fill any holes or gaps with wood filler, and sand smooth once dry. Apply primer if you're painting, then finish with your choice of paint or stain and seal with a durable clear topcoat. For outdoor projects, use exterior-rated primer, paint or stain, and sealer so the piece stands up to the weather.
Source (temporary): https://www.ana-white.com/woodworking-projects/1x3-blanket-ladder-beginner-build