2x2 DIY Wood Pumpkin Decor for Mantle or Tabletops
Here's a great fall project to decorate with - these adorable wood pumpkins are made from 2x2 scrap wood pieces. These little pumpkins can be used throughout the home, from tabletops and shelves, to mantles and countertops. Paint or stain any color. from
Specifications
| Project type | Home Decor |
|---|---|
| Room | living room |
| Difficulty | Starter Projects |
| Estimated cost | scraps |
Dimensions
Use the size-specific shopping and cut lists below.
Shopping List
- 2x2 furring strips or scrap wood (1 foot for a shorter pumpkin, 1-1/2 feet for taller pumpkin)
- 1x2 scrap piece for stem, or use a branch
- wood glue (hot glue preferred but any wood glue will work)
- 2" brad nails can also be used for attaching the 2x2 pieces together, but not required
Cut List
Shorter Pumpkin
- 3 - 2x2 @ 6"
- 1 - 1x2 @ 1" (or use a branch for top)
Taller Pumpkin
- 3 - 2x2 @ 4"
- 1 - 1x2 @ 1" (or use a branch for the top)
Tools
- measuring tape
- jigsaw
Step-by-step Instructions
Glue the 2x2s together and let dry.
Hot glue is preferred as it dries fast and strong, but any wood glue will work - just allow it to fully dry before handling. If you have a brad nailer, you can also use 2" brad nails to attach the 2x2 pieces together.
Paint or stain the 2x2s and the stem.
Then attach the stem with glue or brad nails.
Finishing
Sand all surfaces, starting with a medium grit and finishing with fine. Wipe off the dust, fill any holes or gaps with wood filler, and sand smooth once dry. Apply primer if you're painting, then finish with your choice of paint or stain and seal with a durable clear topcoat. For outdoor projects, use exterior-rated primer, paint or stain, and sealer so the piece stands up to the weather.
Source (temporary): https://www.ana-white.com/woodworking-projects/2x2-diy-wood-pumpkin-decor-mantle-or-tabletops