2x4 Outdoor Coffee Table
Easy to build 2x4 outdoor coffee table using basic tools and beginner techniques. Free
Specifications
| Project type | Coffee Tables |
|---|---|
| Room | Outdoor |
| Style | Farmhouse Furniture |
| Difficulty | Beginner Projects |
| Estimated cost | Under $20 |
Dimensions
Use the size-specific shopping and cut lists below.
Shopping List
- 5 – 2x4 @ 10 feet long
- 80 – self-tapping exterior deck screws, 2-1/2" to 3" long
- Measuring Tape, Pencil, Eye and Ear Protection, Circular Saw or Miter Saw, Drill with bit to match screw heads, Clamps, Clean level worksurface
Cut List
- 4 – 2x4 @ 14-1/2” – Legs
- 2 – 2x4 @ 23-1/2” – Breadboard Ends
- 5 – 2x4 @ 20-1/2” – End aprons, Supports
- 8 – 2x4 @ 47” – Side Aprons, Tabletop Boards
Tools
- measuring tape
- square
- pencil
- safety glasses
- drill
- circular saw
Step-by-step Instructions
Step 1
Attach two legs to an apron, two deck screws per joint. Repeat for second leg set.
Step 2
Screw a breadboard end to the top of the leg set built in previous step, attaching to both legs and apron with deck screws. Repeat for second leg set.
Step 3
Build the table base with long aprons and remaining short aprons, attaching with deck screws. Center the middle support on long aprons.
Step 4
Raise table support up off workbench on scrap 2x4 boards. Attach legs to end aprons with deck screws. Use at least six screws per side.
Step 5
Finishing
Sand all surfaces, starting with a medium grit and finishing with fine. Wipe off the dust, fill any holes or gaps with wood filler, and sand smooth once dry. Apply primer if you're painting, then finish with your choice of paint or stain and seal with a durable clear topcoat. For outdoor projects, use exterior-rated primer, paint or stain, and sealer so the piece stands up to the weather.
Source (temporary): https://www.ana-white.com/woodworking-projects/2x4-outdoor-coffee-table