Beginner Farm Table Benches (2 Tools + $20 in Lumber)
The easiest farmhouse dining benches you can make. Only two tools, no Kreg Jig required. from
Specifications
| Project type | Bench |
|---|---|
| Room | Bedroom |
| Style | Farmhouse Furniture |
| Difficulty | Beginner Projects |
| Estimated cost | Under $20 |
Dimensions
Use the size-specific shopping and cut lists below.
Shopping List
- 1 - 2x6 @ 12 feet long (cut exactly in half)
- 3 - 2x4 @ 8 feet or stud length (will have a little extra if making two benches may be able to buy 5 instead of 6)
- 2-3/4" long self tapping star bit wood screws
- Wood glue
Cut List
- 2 - 2x4 @ 66" - long aprons
- 4 - 2x4 @ 16-1/2" - legs
- 4 - 2x4 @ 7-1/2" - end aprons and stretcher
- 1 - 2x4 @ 4-1/2" - middle
Tools
- measuring tape
- square
- pencil
- safety glasses
- hearing protection
- drill
- compound miter saw
Step-by-step Instructions
Step 1
Screw the leg sets together using the 2-3/4" screws. You can use a 1x piece of wood or 3/4" thick plywood to elevate the aprons/stretchers up 3/4" on the leg when attaching.
Step 2
Attach long aprons at top to legs.
Step 3
Find center of bench and add the middle support. This keeps aprons from spreading and gives you something to attach seat boards to.
Step 4
Screw seat boards to bench. About 1" overhang on ends and 1/4" overhang on side edges.
Finishing
Sand all surfaces, starting with a medium grit and finishing with fine. Wipe off the dust, fill any holes or gaps with wood filler, and sand smooth once dry. Apply primer if you're painting, then finish with your choice of paint or stain and seal with a durable clear topcoat. For outdoor projects, use exterior-rated primer, paint or stain, and sealer so the piece stands up to the weather.
Source (temporary): https://www.ana-white.com/woodworking-projects/beginner-farm-table-benches-2-tools-20-lumber