FindWoodPlansWoodworking Plans

Christmas Card Display Frame with Chicken Wire and Chalkboard

DIY wood frame with chicken wire, clothespin clips and chalkboard. Clip Christmas cards or photos! Free

Christmas Card Display Frame with Chicken Wire and Chalkboard

Specifications

Project typeWall Projects
RoomStorage Solutions
StyleCottage Style Furniture Plans
DifficultyBeginner Projects
Estimated costUnder $20

Dimensions

Use the size-specific shopping and cut lists below.

Christmas Card Display Frame with Chicken Wire and Chalkboard dimension diagram 1

Shopping List

5 - 1x2 @ 8 feet long

5 feet of 24" wide chicken wire

chalkboard 24" x 20" or you can make your own with 1/4" plywood and chalkboard paint

1/2 staples for attaching chicken wire

picture hanging kit (I used a sawtooth hanger)

Cut List

INNER FRAME

2 - 1x2 @ 72"

3 - 1x2 @ 21"

OUTERFRAME

2 - 1x2 @ 24"

2 - 1x2 @ 73-1/2"

CHALKBOARD

24" x 20"

cut chicken wire to fit

Tools

  • measuring tape
  • square
  • pencil
  • safety glasses
  • hearing protection
  • compound miter saw
  • nailer
  • sander
  • staple gun

Step-by-step Instructions

1

Step 1

Build inner frame with either 3/4" pocket holes and 1-1/4" pocket hole screws, or 2" nails and wood glue. Adjust inner frame for square.

Christmas Card Display Frame with Chicken Wire and Chalkboard — step 1
2

Step 2

Measure and cut top and bottom pieces for outerframe. Attach to top and bottom, with 3/8" gap on both sides (centering inner frame on outer frame).

Christmas Card Display Frame with Chicken Wire and Chalkboard — step 2
3

Step 3

Measure and cut sides for outer frame. Attach with 1-1/4" nails and glue to inner frame with outer frame centered on inner frame.

Christmas Card Display Frame with Chicken Wire and Chalkboard — step 3
4

Step 4

Attach chicken wire with staples. Glue and place chalkboard in top frame. Top frame can be additionally attached with 7/8" or shorter staples or brad nails.

Christmas Card Display Frame with Chicken Wire and Chalkboard — step 4
5

Finishing

Sand all surfaces, starting with a medium grit and finishing with fine. Wipe off the dust, fill any holes or gaps with wood filler, and sand smooth once dry. Apply primer if you're painting, then finish with your choice of paint or stain and seal with a durable clear topcoat. For outdoor projects, use exterior-rated primer, paint or stain, and sealer so the piece stands up to the weather.

Source (temporary): https://www.ana-white.com/woodworking-projects/christmas-card-display-frame-chicken-wire-and-chalkboard