Floral Centerpiece with Reclaimed Wood and Upcycled Jars
Turn a simple fence picket, pallet board, or reclaimed wood board into a beautiful, easy-to-make floral centerpiece! This linear, rectangular design fits perfectly on rectangular tables, kitchen countertops, or console tables — anywhere you want to add a touch of charm. Using small recycled jars (like Dollar Tree vases or tonic water bottles), this project makes displaying fresh flowers simple and stunning. Just fill the jars with your favorite cut blooms, and enjoy a gorgeous, budget-friendly arrangement that brightens up any space.
Specifications
| Project type | Home Decor |
|---|---|
| Room | Decor for Any Room |
| Difficulty | Starter Projects |
Dimensions
Use the size-specific shopping and cut lists below.
Shopping List
3 Vase Holder
- 1 Cedar Fence Picket 6'
- 1 1/5" forstner bit or hole saw
- 1-1/4" brad nails
- wood glue
- Top board is 15"
- Bottom board 14" (leave bottom board flush to bottom or I put 1/2" spacers under to raise up a bit)
- Side boards are 8" (adjust depending on jar or vase height)
- Center of holes marked at 4" and 7-1/2" and 11"
Small Single Vase Holder
- Top is "7"
- Bottom is 6"
- Sides are 8"
- Hole marked in center of top board
Cut List
3 Vase Holder - cut from fence picket
- Top board is 15"
- Bottom board 14" (leave bottom board flush to bottom or I put 1/2" spacers under to raise up a bit) - adjust if your boards are not 1/2" thick
- Side boards are 8" (adjust depending on jar or vase height)
Small Single Vase Holder - cut from fence picket
- Top is "7"
- Bottom is 6" - adjust if your boards are not 1/2" thick
- Sides are 8"
Tools
- measuring tape
- square
- pencil
- safety glasses
- drill
- circular saw
- nailer
- countersink drill bit
Step-by-step Instructions
Step 1
Drill holes in the top board using a Forstner bit.
Step 2
Attach top to sides using brad nails and glue.
Step 3
Attach bottom to sides using brad nails and glue.
Finishing
Sand all surfaces, starting with a medium grit and finishing with fine. Wipe off the dust, fill any holes or gaps with wood filler, and sand smooth once dry. Apply primer if you're painting, then finish with your choice of paint or stain and seal with a durable clear topcoat. For outdoor projects, use exterior-rated primer, paint or stain, and sealer so the piece stands up to the weather.
Source (temporary): https://www.ana-white.com/woodworking-projects/diy-floral-centerpiece-reclaimed-wood-and-upcycled-jars