Hanging S’More Station
Make your next campfire extra sweet with this easy-to-build s’more station! Designed with perfectly sized compartments for graham crackers, chocolate bars, and marshmallows, it keeps all the essentials organized and ready to go. Built-in front hooks are great for hanging roasting sticks (just don’t hang hot skewers or ones with exposed sharp tips!). Hang it from a tree, mount it to a wall or siding, or simply set it on a table — it’s a charming, functional addition to any backyard gathering. make it easy to build! With step by step diagrams, shopping list, cut list, build photos and build video, we've got everything you need to get started on this project!
Specifications
| Project type | Food Serving and Display |
|---|---|
| Room | Outdoor |
| Difficulty | Starter Projects |
Dimensions
Use the size-specific shopping and cut lists below.
Shopping List
- 1 - 1x8 @ 15"
- 1 - 1x4 @ 27"
- 1 - 1x6 @ 19"
- 1-1/4" brad nails
- wood glue
- Rope for hanging
- Hooks if desired*
*Depending on where you hang your s'more station, the hooks could be a safety issue, with sharp points hanging or potentially hot skewers being hung on the hooks.
Cut List
- 2 - 1x6 @ 2-3/4" (dividers) - cut first to avoid cutting small pieces
- 1 - 1x6 @ 13-1/2" - bottom
- 2 - 1x4 @ 5-1/2" - sides (measure and cut to fit)
- 1 - 1x4 @ 15" - front (measure and cut to fit)
- 1 - 1x8 @ 15" - back (measure and cut to fit)
Tools
- measuring tape
- safety glasses
- drill
- compound miter saw
- nailer
Step-by-step Instructions
Step 1
Measure and cut the 1x4 side pieces to match the bottom width. Attach with glue and 1-1/4" brad nails.
Step 2
Measure and cut the front piece to fit from 1x4s, attach with 1-1/4" brad nails and wood glue.
Step 3
Measure and cut the back to fit from 1x8, attach with 1-1/4" brad nails and wood glue.
Step 4
Insert the dividers with glue and attach with 1-1/4" brad nails and wood glue.
I used a Cricut to create the lettering in vinyl as shown.
Hooks can be added, be aware of the potential safety issues. I would recommend hanging the screwers with the protected points on the hooks before use, but not hanging between use as the skewers could be hot and potentially burn someone. I tested a couple different methods for hanging, and found that the center hole as shown, attached to a hook or screw, was the most stable. An alternative that worked was two holes on the top corners, with a rope or strap tied around the back of the tree (no damage to tree this way).
Finishing
Sand all surfaces, starting with a medium grit and finishing with fine. Wipe off the dust, fill any holes or gaps with wood filler, and sand smooth once dry. Apply primer if you're painting, then finish with your choice of paint or stain and seal with a durable clear topcoat. For outdoor projects, use exterior-rated primer, paint or stain, and sealer so the piece stands up to the weather.
Source (temporary): https://www.ana-white.com/woodworking-projects/diy-hanging-smore-station-free-woodworking-plans