FindWoodPlansWoodworking Plans
Home/Seating

Slipcover Bench

Quick and easy - build your own slipcovered bench! This is a free DIY project plan for a bench frame - just build, add a cushion and sew a cover for the top. from

Slipcover Bench

Specifications

Project typeBench
RoomBedroom
StyleFarmhouse Furniture
DifficultyBeginner Projects
Estimated cost$20 - $50

Dimensions

Use the size-specific shopping and cut lists below.

Slipcover Bench dimension diagram 1

Shopping List

  • 2 – 2x4s, 8 feet or stud length
  • 1 – 3/4″ Plywood or MDF or Particle Board or OSB 16″ x 55″
  • 2" and 3″ self tapping star bit screws
  • 1 yard 56″ wide decorator fabric OR 2 yards 45″ wide fabric (upholstery weight is best)
  • 3″ foam, 16″ wide x 55″ long
  • wood glue
  • spray adhesive
  • sewing notions
  • paint or stain for the legs

Cut List

  • 4 – 2×4 @ 14 1/4″ (Legs – Cut legs longer if you are using thinner foam. For example, with 1″ thick foam, legs need to be 16 1/4″ long)
  • 2 – 2×4 @ 13″ (End Aprons)
  • 2 – 2×4 @ 49″ (Side Aprons)
  • 1 – 3/4″ Plywood @ 55″ x 16″ (Seat)

Tools

  • measuring tape
  • square
  • pencil
  • safety glasses
  • hearing protection
  • drill
  • circular saw
  • sander
  • level
  • countersink drill bit

Step-by-step Instructions

1

Ends

Start by tapering all of your legs with a straight cut on either a jigsaw or circular saw. Note that if you are using a less thick foam pad, you will need to increase the leg length. The goal is a standard 18″ high bench. Once legs are taperend, attach legs to the end aprons with screws and glue.

Slipcover Bench — step 1
2

Side Aprons

If you have a pocket hole system, attach the side aprons to the legs. Otherwise, use scrap 2x4s to join legs and aprons together.

Slipcover Bench — step 2
3

Top

Screw the top plywood to all legs and aprons.

Slipcover Bench — step 3
4

Foam

Spray adhesive the foam to the top plywood. You can also spray adhesive a layer of batting to soften edges and add some cushioning to the aprons at this stage

Slipcover Bench — step 4
5

Step 5

Slipcover Bench — step 5
6

Finishing

Sand all surfaces, starting with a medium grit and finishing with fine. Wipe off the dust, fill any holes or gaps with wood filler, and sand smooth once dry. Apply primer if you're painting, then finish with your choice of paint or stain and seal with a durable clear topcoat. For outdoor projects, use exterior-rated primer, paint or stain, and sealer so the piece stands up to the weather.

Source (temporary): https://www.ana-white.com/woodworking-projects/diy-slipcover-bench-plans