Wooden Christmas Tree Candle Holders
Christmas Tree Candle Holders These modern Christmas tree candle holders are a beautiful, beginner-friendly DIY project perfect for seasonal decorating or gift-making. The design features tiered wood triangles, a sturdy base, and a front platform for a pillar candle. Build one or make a whole forest – the plan includes two sizes.
Specifications
| Project type | Home Decor |
|---|---|
| Room | Decor for Any Room |
| Difficulty | Beginner Projects |
Dimensions
Use the size-specific shopping and cut lists below.
Shopping List
For Large (1x6) Tree
- 1 - 1x6 @ about 4 feet long (can use cedar fence pickets)
- 1 - 1x2 @ 14-1/2" long
- 1-1/4" brad nails
- wood glue
For Small (1x4) Tree
- 1 - 1x4 @ about 2 feet long
- 1 - 1x2 @ 9-1/2" long
- 1-1/4" brad nails
- wood glue
Cut List
For Large (1x6) Tree
- 1 - 1x6 @ 6-1/4" - base
- 1 - 1x2 @ 14-1/2" - back
- 1 - 1x6 @ 15-3/8" - long point measurement, both ends cut at 30 degrees off square, ends NOT parallel
- 1 - 1x6 @ 11" - long point measurement, both ends cut at 30 degrees off square, ends NOT parallel
- 1 - 1x6 @ 6-3/8" - long point measurement, both ends cut at 30 degrees off square, ends NOT parallel
For Small (1x4) Tree
- 1 - 1x4 @ 4-1/4" - base
- 1 - 1x2 @ 9-1/2" - back
- 1 - 1x4 @ 10-1/8" - long point measurement, both ends cut at 30 degrees off square, ends NOT parallel
- 1 - 1x4 @ 7-1/8" - long point measurement, both ends cut at 30 degrexes off square, ends NOT parallel
- 1 - 1x4 @ 4" - long point measurement, both ends cut at 30 degrees off square, ends NOT parallel
Tools
- measuring tape
- pencil
- safety glasses
- compound miter saw
- nailer
- sander
Step-by-step Instructions
Step 1
Attach the 1x2s to the base with brad nails and glue.
Step 2
Line up the bottom layer of the tree on the center of the base. Attach with glue and 1-1/4" brad nails. Also attach from bottom. TIP: Extend the base off your table so you can lay project flat as you nail.
Step 3
Apply glue between the layers of the tree and back. Attach from back support with 1-1/4" brad nails and glue.
Step 4
Repeat for top row.
Finishing
Sand all surfaces, starting with a medium grit and finishing with fine. Wipe off the dust, fill any holes or gaps with wood filler, and sand smooth once dry. Apply primer if you're painting, then finish with your choice of paint or stain and seal with a durable clear topcoat. For outdoor projects, use exterior-rated primer, paint or stain, and sealer so the piece stands up to the weather.
Source (temporary): https://www.ana-white.com/woodworking-projects/diy-wooden-christmas-tree-candle-holders-free-woodworking-plans-two-sizes