Farmhouse Media Console

Step 1

Start by building the basic box for the media console. To conserve wood, a top is not necessary. You'll just have to be extra attentive to make sure the face frames are attached square.

Build your back face frame first, then attach to back.

TIP: Consider adding the two additional 1x2s as done on front face frame just to finish out shelf dividers.

Step 3

Build front face frame and attach to front. Note that both back and front face frames over extend the ends by 3/8".

Step 4

Place middle dividers in the cabinet and attach by drilling 3/4" pocket holes around bottom and side edges. Attach with glue and screws.

Step 5

Step 6

Attach back.

Step 7

Build top first, then attach top to cabinet as shown here, with equal overhangs on ends and front.

Step 8

Build doors - must watch video on this!!!! - and attach with hinges to the front of the cabinet.

Finishing

Sand all surfaces, starting with a medium grit and finishing with fine. Wipe off the dust, fill any holes or gaps with wood filler, and sand smooth once dry. Apply primer if you're painting, then finish with your choice of paint or stain and seal with a durable clear topcoat. For outdoor projects, use exterior-rated primer, paint or stain, and sealer so the piece stands up to the weather.