FindWoodPlansWoodworking Plans
Home/Decor & Small

Faux Oar or Paddles

Make these faux oars or paddles for about $3 total!!!! Easy DIY project from

Faux Oar or Paddles

Specifications

Project typeWall Art
RoomBathroom
StyleCottage Style Furniture Plans
DifficultyStarter Projects
Estimated costUnder $20

Dimensions

Use the size-specific shopping and cut lists below.

Faux Oar or Paddles dimension diagram 1

Shopping List

For TWO paddles/oars

1 - 1x2 @ 8 feet long

1- 1x3 @ 8 feet long

I used pine furring strips

Optional: 2" brad nails with nailer

Cut List

2 - 1x2 @ 45"

2 - 1x2 @ 3"

4 - 1x3 @ 22" - longest point measurement, one end cut at 45 degree angle

Tools

  • measuring tape
  • square
  • hammer
  • safety glasses
  • hearing protection
  • compound miter saw

Step-by-step Instructions

1

Step 1

Apply glue liberally to the long edge of the 1x3 pieces. Clamp securely to center 1x2 and allow to dry.

Faux Oar or Paddles — step 1
2

Step 2

Apply glue to the end of the longer 1x2. Center smaller 1x2 on end and clamp in place. 2" brad nails can be used to further secure. Allow to dry.

Faux Oar or Paddles — step 2
3

Finishing

Sand all surfaces, starting with a medium grit and finishing with fine. Wipe off the dust, fill any holes or gaps with wood filler, and sand smooth once dry. Apply primer if you're painting, then finish with your choice of paint or stain and seal with a durable clear topcoat. For outdoor projects, use exterior-rated primer, paint or stain, and sealer so the piece stands up to the weather.

Source (temporary): https://www.ana-white.com/woodworking-projects/faux-oar-or-paddles