Flag Inspired Outdoor Wood Coffee Table
DIY Flag inspired outdoor coffee table! Free step by step tutorial from
Specifications
| Project type | Coffee Tables |
|---|---|
| Room | Outdoor |
| Style | Cottage Style Furniture Plans |
| Difficulty | Beginner Projects |
| Estimated cost | Under $20 |
Dimensions
Use the size-specific shopping and cut lists below.
Shopping List
4 - 2x2 @ 8 feet long
7 - 1x2 @ 8 feet long
2 - 1x3 @ 8 feet long
2 1/2" exterior self tapping screws OR 2 1/2" Pocket hole screws
1 1/4" or longer galvanized finish nails
Cut List
7 - 2x2 @ 19 1/2" long
4 - 2x2 @ 15 1/4" long (legs)
3 - 2x2 @ 44 1/2" long
13 - 1x2 @ 47 1/2" long
2 - 1x3 @ 22 1/2" long
2 - 1x3 @ 49" long
Tools
- measuring tape
- square
- pencil
- safety glasses
- hearing protection
- drill
- circular saw
Step-by-step Instructions
Step 1
Start by building the two ends leg sets. You can use pocket hole screws or countersunk screws, your choice. Use an exterior appropriate wood glue as well.
Step 2
Then add the two side supports and bottom stretcher, same technique as the legs.
Step 3
And then the center supports. With all these supports, this table is rock solid when you are done!
Step 4
Next, attach the top slats, leaving about 1/4" in between each slat.
Step 5
And then finish trimming out the remaining sides.
Finishing tutorial coming soon!
Finishing
Sand all surfaces, starting with a medium grit and finishing with fine. Wipe off the dust, fill any holes or gaps with wood filler, and sand smooth once dry. Apply primer if you're painting, then finish with your choice of paint or stain and seal with a durable clear topcoat. For outdoor projects, use exterior-rated primer, paint or stain, and sealer so the piece stands up to the weather.
Source (temporary): https://www.ana-white.com/woodworking-projects/flag-inspired-outdoor-wood-coffee-table