Frame and Panel Planters
Free planter plans! These beautiful cedar planters are just a fraction of the cost to buy - thanks to using cedar fence pickets. You'll love the step by step plans with diagrams and shopping and cut lists.
Specifications
| Project type | Planters, Garden Beds, and Greenhouses |
|---|---|
| Room | Outdoor |
| Style | Farmhouse Furniture |
| Difficulty | Intermediate |
| Estimated cost | $20 - $50 |
Dimensions
Use the size-specific shopping and cut lists below.
Shopping List
3 - 1x3 @ 8 feet long
2 - 1x2 @ 8 feet long
6 - 5 1/2" wide x 1/2" thick fence pickets 6 feet long
Cut List
- 4 - 1x3 @ 20"
- 4 - 1x3 @ 26 1/4"
- 4 - 1x3 @ 18 1/2"
- 4 - 1x2 @ 26 1/4"
- 2 - 1x2 @ 21 1/2"
- 2 - 1x2 @ 18 1/2"
- 12 - 5 1/2" wide fence pickets 31 1/4" long
Tools
- measuring tape
- square
- pencil
- safety glasses
- hearing protection
- kreg-jig
- drill
- circular saw
- nailer
- countersink drill bit
Step-by-step Instructions
Step 1
First, build two frames, note that they are sized differently.
Step 2
Then add the tops to the two frames.
Step 3
Attach the fencing, starting in the middle, working outward, with galvanized finish nails and exterior wood glue.
Step 4
Use predrilled holes and attach the four panels together with screws. You can skip the glue to break the planters down and store flat for the winter.
Step 5
Finishing
Sand all surfaces, starting with a medium grit and finishing with fine. Wipe off the dust, fill any holes or gaps with wood filler, and sand smooth once dry. Apply primer if you're painting, then finish with your choice of paint or stain and seal with a durable clear topcoat. For outdoor projects, use exterior-rated primer, paint or stain, and sealer so the piece stands up to the weather.
Source (temporary): https://www.ana-white.com/woodworking-projects/frame-and-panel-planters