FindWoodPlansWoodworking Plans
Home/Storage & Organization

General Store Cubbies

These simple General Store Cubbies are easy to build and feature six cubbies, each with front lips to keep contents in place. Special thanks to our readers for sharing their photos.

General Store Cubbies

Specifications

Project typeBookshelf and Bookcase Plans
RoomStorage Solutions
StyleFarmhouse Furniture
DifficultyBeginner Projects
Estimated cost$20 - $50

Dimensions

Use the size-specific shopping and cut lists below.

General Store Cubbies dimension diagram 1

Shopping List

5 – 1×3 Pine Boards, 8 foot length

3 – 1×12 Pine Boards, 8 foot length

2″ Screws

2″ Finish Nails

Wood Glue and Finishing Supplies

Cut List

5 – 1×3 @ 42″ (Shelf Trim)

4 – 1×12 @ 16 7/8″(Cubby Dividers)

3 – 1×12 @ 40 1/2″ (Shelves)

2 – 1×12 @ 36″ (Sides)

Tools

  • measuring tape
  • square
  • pencil
  • hammer
  • safety glasses
  • hearing protection
  • drill
  • circular saw
  • nailer
  • sander
  • level
  • countersink drill bit

Step-by-step Instructions

1

Step 1

Start by building the box as shown in the diagram above. Use 2″ screws and glue or pocket hole screws.

General Store Cubbies — step 1
2

Step 2

Add the cubby dividers. How I would do this is put the bottom dividers in fixed first. Then put the top dividers in, but you wont’ be able to fasten the bottom of the top dividers to the middle shelf. Don’t despair. Glue and let dry in place. I’ve got you covered

General Store Cubbies — step 2
3

Step 3

Use the trim boards to nail the bottom boards in place. Make sure you also nail the trim boards to the shelf and the sides. Add trim boards to the back. IMPORTANT: Adjust for square before attaching these boards, especially if you are stacking multiple cubbies.

General Store Cubbies — step 3
4

Finishing

Sand all surfaces, starting with a medium grit and finishing with fine. Wipe off the dust, fill any holes or gaps with wood filler, and sand smooth once dry. Apply primer if you're painting, then finish with your choice of paint or stain and seal with a durable clear topcoat. For outdoor projects, use exterior-rated primer, paint or stain, and sealer so the piece stands up to the weather.

Source (temporary): https://www.ana-white.com/woodworking-projects/general-store-cubbies