Grocery Bag Dispenser Holder
Finally a solution for those disposable grocery bags!
Specifications
| Project type | Wall Projects |
|---|---|
| Room | kitchen |
| Style | Farmhouse Furniture |
| Difficulty | Beginner Projects |
Dimensions
Use the size-specific shopping and cut lists below.
Shopping List
1 - 1x6 @ 8 feet long
1 - 2x3 or 2x4 @ 12" long - cleat for hanging, can also use hanging brackets
1-1/4" brad nails
2 - knobs (nails or screw heads would work too)
Cut List
5 - 1x12 @ 11-3/4" (I shortened these cuts so you can get all the cuts from the 1x6x8)
2 - 1x12 @ 18" - cut to fit
1 - 2x3 or 2x4 @ 11-3/4"
Tools
- measuring tape
- square
- pencil
- drill
- circular saw
- nailer
- hole saw
Step-by-step Instructions
Step 1
Nail two 1x6s together as shown in diagram. TIP: Elevate inset board on a 1x6 board to get the 3/4" inset depth. Repeat to build two.
Step 2
Layout the top and bottom with the middle board in place. Measure and cut sides (should be about 18"). Nail the sides to the top and bottoms you built in step 1 with 1-1/4" brad nails and wood glue.
Nail the last 1x6 board in the center.
Cut out the openings for loading and dispensing the bags. I wish I'd used a jigsaw to cut a square opening in the front as it does look a little "birdhousy" - as my four year old put it.
Step 4
To hang, I cut a scrap 2x4 board 11-3/4" long and screwed it to the wall where i wanted the grocery bag dispenser hung. Then I just placed the grocery bag dispenser over the 2x board and screwed it down with a couple of 1-1/4" wood screws. You could also hang with metal brackets or a picture hanging kit.
Finishing
Sand all surfaces, starting with a medium grit and finishing with fine. Wipe off the dust, fill any holes or gaps with wood filler, and sand smooth once dry. Apply primer if you're painting, then finish with your choice of paint or stain and seal with a durable clear topcoat. For outdoor projects, use exterior-rated primer, paint or stain, and sealer so the piece stands up to the weather.
Source (temporary): https://www.ana-white.com/woodworking-projects/grocery-bag-dispenser-holder