Happier Homemaker Farmhouse Table

Step 1

Start by attaching the shortest 2x4s together. This is where the nailer would come in handy because nails are so tiny and difficult to see/easy to hide. But you can use screws to - just hide on the insides.

Step 2

Now attach with screws and glue to the first set of legs.

Step 3

Then attach the second set of legs to the outsides.

Attach short aprons on top on the outsides of the legs sets.

NOTE: Pocket hole users will want to drill 1 1/2" pocket holes facing upward on insides of aprons to attach tabletop in later steps.

Step 5

Step 6

Next, Add the 2x2 under tabletop supports. These will help you place the tabletop boards really close together. NOTE: If you have a pocket hole jig, you can just build your tabletop as one piece, and then attach to aprons.

Step 7

Lay the boards down, and the tabletop on top. Start at the middle and work your way outward, minimizing gaps between the boards as you screw down from underside. For exterior use, consider a 1/4" gap between boards for water drainage. You may also wish to attach from top into end aprons in pattern.

Step 8

Add hardware to base - check out the Happier Homemaker for more details on how they did that.

Finishing

Sand all surfaces, starting with a medium grit and finishing with fine. Wipe off the dust, fill any holes or gaps with wood filler, and sand smooth once dry. Apply primer if you're painting, then finish with your choice of paint or stain and seal with a durable clear topcoat. For outdoor projects, use exterior-rated primer, paint or stain, and sealer so the piece stands up to the weather.