Herb Garden Planter from Cedar Fence Pickets
to build a DIY Kitchen Herb Garden Planter from a cedar fence picket - just the right size for a shelf or window sill. This is a for beginners with detailed diagrams, shopping and cut list.
Specifications
| Project type | Planters, Garden Beds, and Greenhouses |
|---|---|
| Room | Outdoor |
| Style | Farmhouse Furniture |
| Difficulty | Starter Projects |
| Estimated cost | Under $20 |
Dimensions
Use the size-specific shopping and cut lists below.
Shopping List
- 1 cedar fence picket, 5--1/2" wide
- 1 1/4" exterior galvanized finish nails (you could use exterior screws too)
- Wood glue suitable for exterior applications
Cut List
- 2 - 5 1/2" wide by 1/2" thick cedar fence pickets @ 5 1/2" long
- 2 - 5 1/2" wide by 1/2" thick cedar fence pickets @ 20 " long
- 1 - 5 1/2" wide by 1/2" thick cedar fence pickets @ 19" long
Tools
- measuring tape
- square
- pencil
- safety glasses
- hearing protection
- circular saw
- nailer
- sander
- countersink drill bit
Step-by-step Instructions
Step 1
Nail the two ends to the bottom
Step 2
Then nail the two sides to the bottom and ends. Easy peasy!
Finishing
Sand all surfaces, starting with a medium grit and finishing with fine. Wipe off the dust, fill any holes or gaps with wood filler, and sand smooth once dry. Apply primer if you're painting, then finish with your choice of paint or stain and seal with a durable clear topcoat. For outdoor projects, use exterior-rated primer, paint or stain, and sealer so the piece stands up to the weather.
Source (temporary): https://www.ana-white.com/woodworking-projects/herb-garden-planter-cedar-fence-pickets