House Shaped Craft Desk
Build this cute desk, easy DIY
Specifications
| Project type | Kids Tables and Chairs |
|---|---|
| Room | Craftroom |
| Style | Cottage Style Furniture Plans |
| Difficulty | Beginner Projects |
| Estimated cost | $50 - $100 |
Dimensions
Use the size-specific shopping and cut lists below.
Shopping List
1 - project panel 72" x 23-1/4" like this one p/Edge-Glued-Panel-Common-1-1- 8-in-x-23-1-4-in-x-6-ft- Actual-1-125-in-x-23-25-in-x- 71-5-in-493643/202017007
5 - 2x2 @ 8 feet long
2-1/2" pocket hole screws
1-1/4" brad nails
NOTE: Jaime couldn't find a good project panel so ended up using 1x12s instead. You can see how she did that here.
Cut List
4 - 2x2 @ 20-3/4" long point to long point, ends not parallel, both ends cut at 30 degrees off square
4 - 2x2 @ 60" - longest point measurement, one end cut at 30 degrees off square
2 - 2x2 @ 33"
4 - 2x2 @ 20-1/4"
2 - Project panels @ 23-1/4" x 36"
Tools
- measuring tape
- square
- pencil
- safety glasses
- hearing protection
- kreg-jig
- drill
- circular saw
- jigsaw
- nailer
- sander
Step-by-step Instructions
Step 1
Build two of the frames. I recommend a Kreg Jig here, the pocket holes will work really well for attaching the angles. Use the 1-1/2" setting and 2-1/2" pocket hole screws.
Step 2
Attach frames together with side pieces, hide pocket holes by placing facing upward - the shelving and desktop will cover in next step.
Step 3
Notch out corners of project panels and attach to the frames with glue and 1-1/4" brad nails.
Finishing
Sand all surfaces, starting with a medium grit and finishing with fine. Wipe off the dust, fill any holes or gaps with wood filler, and sand smooth once dry. Apply primer if you're painting, then finish with your choice of paint or stain and seal with a durable clear topcoat. For outdoor projects, use exterior-rated primer, paint or stain, and sealer so the piece stands up to the weather.
Source (temporary): https://www.ana-white.com/woodworking-projects/house-shaped-craft-desk