Industrial Chic Reclaimed Wood Shelves
Industrial chic shelves made of reclaimed wood, inspired by Pottery Barn Blacksmith shelf. Save money by building your own shelves from reclaimed pallet boards and brackets.
Specifications
| Project type | shelves |
|---|---|
| Room | Bathroom |
| Style | Farmhouse Furniture |
| Difficulty | Starter Projects |
| Estimated cost | Under $20 |
Dimensions
Use the size-specific shopping and cut lists below.
Shopping List
4 Brackets like these (comes from four pack)
8 - 1x6 Board, 36" long
Picture hanging kit or 8 screws for attaching shelves to studs in walls
Cut List
1 - 1x6 @ 36"
Tools
- measuring tape
- square
- pencil
- safety glasses
- hearing protection
- drill
- circular saw
- level
Step-by-step Instructions
Step 1
Attach brackets to shelves as shown above. I placed mine on the ends, but there is no reason why you couldn't place your brackets inset.
Step 2
Then position your shelves on the wall and mark the screw hole locations. Use either a drywall anchoring system or screw into studs in the wall (just like you are hang a photo) to hang the shelves.
Finishing
Sand all surfaces, starting with a medium grit and finishing with fine. Wipe off the dust, fill any holes or gaps with wood filler, and sand smooth once dry. Apply primer if you're painting, then finish with your choice of paint or stain and seal with a durable clear topcoat. For outdoor projects, use exterior-rated primer, paint or stain, and sealer so the piece stands up to the weather.
Source (temporary): https://www.ana-white.com/woodworking-projects/industrial-chic-reclaimed-wood-shelves