Kids Flip Chair/Toddler Flip Seat
This flip seat is a favorite for kids because it has a low seat, a high seat, can be pushed around and used as a table. This project can be made from scraps or from discount boards (cheap project!) and has only straight cuts that can be done with a hand saw or chop saw. It can easily be adapted for bigger kids.
Specifications
| Project type | Kids Tables and Chairs |
|---|---|
| Room | Kids and Toys |
| Style | Children's and Kid's Room Furniture and Toy Plans |
| Difficulty | Starter Projects |
| Estimated cost | scraps |
Dimensions
Use the size-specific shopping and cut lists below.
Shopping List
- (1) 1x10 4' sides and seat
- (1) 1x8 14" back
- (1) 1x6 14" back
- 1 3/4" self tapping wood screws
Cut List
- (2) 1x10 13 3/4" (may be slightly less than this--mine was 13 11/16". Measure boards together and cut at that measurement so that it will be flush)
- (1) 1x10 14"
- (1) 1x8 14"
- (1) 1x6 14"
Tools
- measuring tape
- square
- pencil
- safety glasses
- hearing protection
- drill
- compound miter saw
- sander
- countersink drill bit
Step-by-step Instructions
Step 1
Use one of the boards to lightly draw and determine the "T" space where you will drill the holes. Mark and drill, with a countersink bit, evenly spaced holes on both sides. Use clamps/corner clamps/glue and screws to put it together. Make sure the edges are all flush so that it doesn't turn into a rocking chair;)
Step 2
I just used glue on the part where the backs meet the seat so I had less holes to fill. If you really love wood filler and sanding, go ahead and do some kreg jig holes to attach it in the back.
Step 3
Sand down the project and round the corners and edges to make it more kid friendly. Fill in the countersink holes and do some more sanding. Finish as desired-I used no VOC paint and non-toxic shellac on the one I made for my son (in case he decided to chew on it). Beware, it may be used by curious toddlers to empty the Brita pitcher!
Step 4
Step 5
Step 6
Low seat.
Step 7
Step 8
Enjoy!
Finishing
Sand all surfaces, starting with a medium grit and finishing with fine. Wipe off the dust, fill any holes or gaps with wood filler, and sand smooth once dry. Apply primer if you're painting, then finish with your choice of paint or stain and seal with a durable clear topcoat. For outdoor projects, use exterior-rated primer, paint or stain, and sealer so the piece stands up to the weather.
Source (temporary): https://www.ana-white.com/woodworking-projects/kids-flip-chairtoddler-flip-seat