FindWoodPlansWoodworking Plans

Kitchen Cabinet Door Organizer Paper Towel Holder

Build a Smart Kitchen Cabinet Door Organizer & Paper Towel Holder Maximize under-sink storage with this ultra-simple DIY cabinet door organizer that combines a paper towel holder with a tidy shelf for cleaners and brushes — all for about $20 and a quick afternoon build. Perfect for busy kitchens, this project adds hidden, handy storage right where you need it without stealing counter space. The plan uses basic pine boards and simple tools, and fits standard cabinet doors once you measure your opening first. Installation is easy with a few small brackets, and you’ll end up with a durable, everyday solution that keeps supplies organized and out of sight. Beginner woodworkers will appreciate the clear steps and minimal cuts, while seasoned builders will love how much function you get for very little effort and cost.

Kitchen Cabinet Door Organizer Paper Towel Holder

Specifications

Project typeStorage Woodworking Plans
Roomkitchen
StyleFarmhouse Furniture
DifficultyStarter Projects
Estimated costUnder $20

Dimensions

Use the size-specific shopping and cut lists below.

Kitchen Cabinet Door Organizer Paper Towel Holder dimension diagram 1

Shopping List

  • 1 - 1x6 @ 6 feet long
  • 1 - 1x2 @ 2 feet long
  • Either 2" brad nails OR 2" trim screws OR 1 1/4" Pocket Hole Screws
  • 4 - Small L brackets with 1/2" hardware (for attaching to cabinet door)

Cut List

  • 2 - 1x6 @ 18 1/2" (sides - cut top end off in a curve)
  • 1 - 1x6 @ 12" (bottom)
  • 2 - 1x2 @ 12" (rails)

Tools

  • measuring tape
  • square
  • pencil
  • safety glasses
  • hearing protection
  • drill
  • jigsaw
  • countersink drill bit

Step-by-step Instructions

1

Step 1

I actually waited until the organizer was complete to do the top rounded cuts with a jigsaw - but you can do that first if you want. Just attach the bottom to the sides with your favorite fastening technique.

Kitchen Cabinet Door Organizer Paper Towel Holder — step 1
2

Step 2

Then add rails to the tops and bottoms for extra support. If you don't want to add a paper towel holder, you can also add a shelf at the top.

Kitchen Cabinet Door Organizer Paper Towel Holder — step 2
3

Step 3

To attach to the door, we purchased L brackets and attached the organizer to the cabinet door using the L brackets. Super easy!

Kitchen Cabinet Door Organizer Paper Towel Holder — step 3
4

Step 4

Now just fill it up with your favorite supplies and you are done!

Kitchen Cabinet Door Organizer Paper Towel Holder — step 4
5

Finishing

Sand all surfaces, starting with a medium grit and finishing with fine. Wipe off the dust, fill any holes or gaps with wood filler, and sand smooth once dry. Apply primer if you're painting, then finish with your choice of paint or stain and seal with a durable clear topcoat. For outdoor projects, use exterior-rated primer, paint or stain, and sealer so the piece stands up to the weather.

Source (temporary): https://www.ana-white.com/woodworking-projects/kitchen-cabinet-door-organizer-paper-towel-holder