Large Open Bird Nesting House
For birds that don't need an enclosed birdhouse, but are still looking for a spot to nest sheltered from the rain, this simple open birdhouse project has been a big success in helping birds nest. By putting this up in a tree, we keep birds from nesting in our covered deck rafters. Just make sure you install it considering the wind direction and very securely to the tree. from
Specifications
| Project type | Other Projects |
|---|---|
| Room | Outdoor |
| Style | Cottage Style Furniture Plans |
| Difficulty | Starter Projects |
| Estimated cost | scraps |
Dimensions
Use the size-specific shopping and cut lists below.
Shopping List
- 1- 1x12 @ 4 feet long
- 1 - 1x6 @ 2 feet long
- 1 - 1x12 @ 1 foot long
- 1 - 3/4" exterior self tapping wood screws
- Lag bolts for attaching to tree
Cut List
- 1 - 1x12 @ 16" - bottom
- 1 - 1x12 @ 9-1/2" - floor
- 1 - 1x12 @ 10-1/2" - long point measurement, on end cut at 30 degree bevel
- 2 - 1x6 @ 10-1/2" - one end cut at 30 degrees off square angle, long point measurement
- 1 - 1x2 @ 11-1/4"
Tools
- measuring tape
- square
- pencil
- hearing protection
- drill
- compound miter saw
Step-by-step Instructions
Step 1
Step 2
Step 3
Step 4
Finishing
Sand all surfaces, starting with a medium grit and finishing with fine. Wipe off the dust, fill any holes or gaps with wood filler, and sand smooth once dry. Apply primer if you're painting, then finish with your choice of paint or stain and seal with a durable clear topcoat. For outdoor projects, use exterior-rated primer, paint or stain, and sealer so the piece stands up to the weather.
Source (temporary): https://www.ana-white.com/woodworking-projects/large-open-bird-nesting-house