FindWoodPlansWoodworking Plans

Liberty Wall Art from Scraps

A beautiful wall art (and huge) project that can bring a festive spirit to your summer living space. Uses scrap boards. Distressing required.

Liberty Wall Art from Scraps

Specifications

Project typeWall Projects
RoomBedroom
StyleFarmhouse Furniture
DifficultyBeginner Projects
Estimated cost$20 - $50

Dimensions

Use the size-specific shopping and cut lists below.

Liberty Wall Art from Scraps dimension diagram 1

Shopping List

1 – 4′x4′ sheet of plywood, 1/4″ to 1/2″ thickness (can be OSB)

5 – 1×4 Furring Strips, 8′ long

3 – 1×2 Furring Strips, 8′ Long

2 – 1×3 Furring Strips, 8′ Long

Scrap 1×6

1″ nails

Glue

Paint and Distressing Materials

Cut List

9 – 1x2s @ 12 1/2″

8 – 1×4 @ 12 1/2″

2 – 1×4 @ 8″

1 – 1×6 @ 8″

4 – 1×3 @ 16 1/2″

1 – 1×4 @ 16 1/2″

2 – 1×4 @ 7″

2 – 1×4 @ 10 1/2″

5 – 1×4 @ 9 1/2″

4 – 1×2 @ 8 1/2″

3 – 1×4 @ 8 1/2″

4 – 1×3 @ 16 1/2″

5 – 1×2 @ 13 1/2″

2 – 1×4 @ 7″

2 – 1×4 @ 10 1/2″

2 – 1×4 @ 18 1/2″

1- 1×4 @ 13 1/2″

4 – 1×3 @ 13 1/2″

2 – 1×4 @ 14″

4 – 1×4 @ 19″

4 – 1×4 @ 10″

Tools

  • measuring tape
  • square
  • pencil
  • hammer
  • safety glasses
  • hearing protection
  • jigsaw

Step-by-step Instructions

1

CUTTING AND LAYOUT

The diagram above shows the board widths in the project. The red boards are 1x4s, the turquoise are 1x2s, the green are 1x3s and the one blue board is a 1×6. Layout as shown above. Don’t stress if the boards don’t come out exactly even, part of this projects appeal is the hand made character.

Liberty Wall Art from Scraps — step 1
2

PAINT AND DISTRESSING

Paint your boards and distress as shown above.

Liberty Wall Art from Scraps — step 2
3

NAILING DOWN

With glue and 1″ nails, start at the upper right corner, and work your way right, gluing and nailing down boards. Keep the top edges flush and check for square as you go. The plywood back will be slightly smaller than the top boards, as shown above.

Liberty Wall Art from Scraps — step 3
4

Finishing

Sand all surfaces, starting with a medium grit and finishing with fine. Wipe off the dust, fill any holes or gaps with wood filler, and sand smooth once dry. Apply primer if you're painting, then finish with your choice of paint or stain and seal with a durable clear topcoat. For outdoor projects, use exterior-rated primer, paint or stain, and sealer so the piece stands up to the weather.

Source (temporary): https://www.ana-white.com/woodworking-projects/liberty-wall-art-scraps