Modern Farm Benches
This bench is designed to work with the Modern Farm Table, easy to build, no pocket holes required! Thanks Heather from My Creative Life for sharing your photos. More photos and link below.
Specifications
| Project type | Bench |
|---|---|
| Room | dining room |
| Style | Farmhouse Furniture |
| Difficulty | Beginner Projects |
| Estimated cost | Under $20 |
Dimensions
Use the size-specific shopping and cut lists below.
Shopping List
1 - 2x6 @ 8 feet or stud length
2 - 2x4 @ 8 feet long
1 - 2x2 @ 8 feet long
1 - 2x12 @ 4 feet long (OR use a 2x6 for the seat - grab an extra
2x6 @ 8 feet long
Cut List
4 - 2x6 @ 18"
2 - 2x2 @ 11 1/2"
2 - 2x4 @ 47 1/2"
2 - 2x4 @ 3 1/2"
1 - 2x12 @ 47 1/2"
Tools
- measuring tape
- square
- safety glasses
- hearing protection
- kreg-jig
- drill
- circular saw
- sander
Step-by-step Instructions
Step 1
Start with 2 of the legs. Measure down and in from the outside corners 1 1/2". Screw the 2x2 in place, as shown above.
Step 2
Add the side apron pieces, the long 2x4s as shown above. Keep the top edge of the 2x4 flush with the top of the legs. Predrill and countersink into the 2x2. Also, screw from the outside of the leg pieces into the end edge of the side apron.
Step 3
Add the end apron pieces, predrilling and securing to the 2x2. Keep the top edge flush with the leg pieces.
Step 4
Add the seat, the 2x12, as shown above. Predrill and screw through the sides of the apron into the outer edges of the seat.
Finishing
Sand all surfaces, starting with a medium grit and finishing with fine. Wipe off the dust, fill any holes or gaps with wood filler, and sand smooth once dry. Apply primer if you're painting, then finish with your choice of paint or stain and seal with a durable clear topcoat. For outdoor projects, use exterior-rated primer, paint or stain, and sealer so the piece stands up to the weather.
Source (temporary): https://www.ana-white.com/woodworking-projects/modern-farm-benches