Modern Play Table with Storage
Modern Wooden Kids Play Table with Storage Bins This solid wood kids play table is perfect for creative activities like LEGO building, arts, and crafts. Featuring deep side storage bins for easy organization, the table boasts a warm, stained finish that blends beautifully with any modern farmhouse or minimalist playroom. Paired with soft, fabric-covered white stools, it's both functional and stylish—ideal for children's play spaces, homeschooling, or activity corners.
Specifications
| Project type | Kids Tables and Chairs |
|---|---|
| Room | Craftroom |
| Style | Modern Style Furniture Plans |
| Difficulty | Beginner Projects |
| Estimated cost | $20 - $50 |
Dimensions
Use the size-specific shopping and cut lists below.
Shopping List
5 - 1x4 @ 8 feet long
1 - 3/4" thick plywood or MDF project panel, 24" x 48"
Cut List
LEGS
- 4 - 1x4 @ 22-1/2" long (cut these from the same boards used to cut the side aprons)
- 4 - 1x4 @ 23-1/4" long
TABLETOP
- 6 - 1x4 @ 24" long - trays
- 2 - 1x4 @ 50-1/2" long - side aprons
- 1 - 24" x 40" x 3/4" plywood or MDF panel - tabletop
Tools
- measuring tape
- square
- safety glasses
- hearing protection
- kreg-jig
- drill
- circular saw
- compound miter saw
- nailer
- sander
Step-by-step Instructions
Step 1
Drill 3/4" pocket holes, two per end, on each of the four 1x4 that are 22-1/2" long. Then attach to the legs with 1-1/4" pocket hole screws and glue. Set legs aside when done.
Step 2
Drill two 3/4" pocket holes on each end of the six 1x4s that are 24" long. Nail together three of the boards in a U shape with 1-1/4" nails and glue, keeping all outside edges flush, with pocket holes on the outsides. Make two trays.
Step 3
Attach the trays to the side aprons with 1-1/4" pocket hole screws and glue, outside edges are flush.
Step 4
Cut the 24" x 48" project panel down in size to 40". Drill 3/4" pocket holes along the underside of the 40" long sides, spacing about every 6-8". Place panel inside frame, with pocket holes on underside, checking to make sure trays are positioned correctly, and attach with 1-1/4" pocket hole screws and glue. Leave 1/4" gaps on ends of panel to allow paper to feed through.
Step 5
Attach legs to the underside of the play table. You must also screw to the sides of the tabletop.
Finishing
Sand all surfaces, starting with a medium grit and finishing with fine. Wipe off the dust, fill any holes or gaps with wood filler, and sand smooth once dry. Apply primer if you're painting, then finish with your choice of paint or stain and seal with a durable clear topcoat. For outdoor projects, use exterior-rated primer, paint or stain, and sealer so the piece stands up to the weather.
Source (temporary): https://www.ana-white.com/woodworking-projects/modern-play-table-storage