Modern Vertical Slat Top Console
Perfect indoors or out, this easy build slat top console table has a modern design, heavy legs, and water drainage in the top. This is a beginner friendly project plan with step by step diagrams, shopping and cut lists from See Related: Matching Bench Plans
Specifications
| Project type | Console Table Plans |
|---|---|
| Room | Entryway and Mudroom |
| Style | Modern Style Furniture Plans |
| Difficulty | Intermediate |
| Estimated cost | $20 - $50 |
Dimensions
Use the size-specific shopping and cut lists below.
Shopping List
- 10 - 2x4 @ 8 feet or stud length
- 4 - 1x4 @ 8 feet long
- 2 1/2” Pocket Hole Screws
- 2” brad nails
- Exterior Wood Glue
Cut List
- 7 - 2x4 @ 56”
- 14 - 2x4 @ 26 1/2”
- 12 - 1x4 @ 30”
Tools
- measuring tape
- square
- pencil
- safety glasses
- hearing protection
- kreg-jig
- nailer
- sander
Step-by-step Instructions
Step 1
Lay out the first pieces. This will be the front, and all nails/screws will be attached to the back side of these pieces. If you have a pocket hole jig, go ahead and attach the top to the legs.
Step 2
Then layer a row of 1x4s to the inside of the 2x4s.
Step 3
Next, layer a row of 2x4s over the 1x4s. You can nail and glue from here on out.
Step 4
Just continue to add layers until you get to the desired width.
Finishing
Sand all surfaces, starting with a medium grit and finishing with fine. Wipe off the dust, fill any holes or gaps with wood filler, and sand smooth once dry. Apply primer if you're painting, then finish with your choice of paint or stain and seal with a durable clear topcoat. For outdoor projects, use exterior-rated primer, paint or stain, and sealer so the piece stands up to the weather.
Source (temporary): https://www.ana-white.com/woodworking-projects/modern-vertical-slat-top-console