FindWoodPlansWoodworking Plans

Ottoman or Accent Table for Simple Modern Outdoor Sectional

This simple woodworking plan is an ottoman for our modern outdoor sectional collection, and can also be used as a coffee table or accent table. You'll just need a drill and a saw to build. Step by step plans with diagrams, cut list and materials. Check out the matching sectional plans and learn how to finish wood for outdoor use.

Ottoman or Accent Table for Simple Modern Outdoor Sectional

Specifications

Project typeOutdoor Seating, Lounging and Accents
RoomOutdoor
StyleModern Style Furniture Plans
DifficultyBeginner Projects
Estimated costUnder $20

Dimensions

Use the size-specific shopping and cut lists below.

Ottoman or Accent Table for Simple Modern Outdoor Sectional dimension diagram 1

Shopping List

1 - 2x2 @ 50"

3 - 2x4 @ 8 feet long (recommend cedar or outdoor appropriate)

60 - 2-1/2" long exterior self tapping wood screws (deck screws or similar)

Cut List

2 - 2x4 @ 22" - seat frame

2 - 2x4 @ 19" - seat frame

4 - 2x4 @ 13-1/2" - legs

6 - 2x4 @ 22" - tabletop boards

2 - 2x2 @ 25" - end trim

Tools

  • measuring tape
  • square
  • safety glasses
  • hearing protection
  • drill
  • circular saw

Step-by-step Instructions

1

Step 1

Build the seat frame by attaching the seat boards together with 2-1/2" self tapping wood screws, two per joint.

Ottoman or Accent Table for Simple Modern Outdoor Sectional — step 1
2

Step 2

Attach legs with 2-1/2" self tapping wood screws, two per joint,from the inside of the seat frame into the back side of the legs (it's good to screw at a slight angle - this will help prevent any wobbles

Ottoman or Accent Table for Simple Modern Outdoor Sectional — step 2
3

Layout tabletop slat boards, evenly spacing. Screw down.

TIP: You can measure and mark out the screw holes for a neater final finish.

Ottoman or Accent Table for Simple Modern Outdoor Sectional — step 3
4

Step 4

Attach 2x2 trim to the ends of the tabletop slats and also to the tops of the legs.

Ottoman or Accent Table for Simple Modern Outdoor Sectional — step 4
5

Finishing

Sand all surfaces, starting with a medium grit and finishing with fine. Wipe off the dust, fill any holes or gaps with wood filler, and sand smooth once dry. Apply primer if you're painting, then finish with your choice of paint or stain and seal with a durable clear topcoat. For outdoor projects, use exterior-rated primer, paint or stain, and sealer so the piece stands up to the weather.

Source (temporary): https://www.ana-white.com/woodworking-projects/ottoman-or-accent-table-simple-modern-outdoor-sectional