Outdoor Accent Table, Plant Stand or Stool
This simple DIY plan will help you build a lightweight, sturdy stool, plant stand or side table. It's easy to build using hidden joinery for a professional finished product. from include step by step diagrams, shopping list and cut list.
Specifications
| Project type | Outdoor Seating, Lounging and Accents |
|---|---|
| Room | Outdoor |
| Style | Children's and Kid's Room Furniture and Toy Plans |
| Difficulty | Intermediate |
| Estimated cost | Under $20 |
Dimensions
Use the size-specific shopping and cut lists below.
Shopping List
- 1 - 2x2 @ 4 feet long
- 1 - 1x3 @ 8 feet long
- 1-1/4" and 2-1/2" pocket hole screws
Cut List
- 4 - 2x2 @ 9 3/4" (Ends cut at five degrees off square with a five degree bevel, ends parallel to each other)
- 4 - 1x3 @ 6 1/2" (Aprons - both ends cut at 5 degrees off square, NOT parallel to each other)
- 4 - 1x3 @ 10 3/4" (Seat Boards)
Tools
- measuring tape
- square
- pencil
- safety glasses
- hearing protection
- kreg-jig
- drill
- compound miter saw
- nailer
- sander
- countersink drill bit
Step-by-step Instructions
Step 1
Mark the inside corners of the legs.
Step 2
Attach aprons to legs as shown above. You can use either the Kreg Jig or just screws and glue.
Step 3
Start in the center and work your way out, attaching seat boards as shown above.
Step 4
Optionally, you can add supports like done above, but it's not necessary for support.
Finishing
Sand all surfaces, starting with a medium grit and finishing with fine. Wipe off the dust, fill any holes or gaps with wood filler, and sand smooth once dry. Apply primer if you're painting, then finish with your choice of paint or stain and seal with a durable clear topcoat. For outdoor projects, use exterior-rated primer, paint or stain, and sealer so the piece stands up to the weather.
Source (temporary): https://www.ana-white.com/woodworking-projects/outdoor-accent-table-plant-stand-or-stool