Primitive Bench
Build your own bench! This beautiful piece is inspired by vintage benches, and is perfect as a low console table and for occasional seating. We love this bench under a window, in a hall, at the end of a bed or even on the front porch! from
Specifications
| Project type | Bench |
|---|---|
| Room | Bedroom |
| Style | Farmhouse Furniture |
| Difficulty | Beginner Projects |
| Estimated cost | $20 - $50 |
Dimensions
Use the size-specific shopping and cut lists below.
Shopping List
- 2 - 1x8 @ 8 feet long
- 1 - 1x12 @ 10 feet long
Cut List
- 2 - 1x12 @ 17-1/4" (legs)
- 1 - 1x12 @ 84" (seat)
- 2- 1x8 @ 84" (aprons)
Tools
- measuring tape
- square
- pencil
- safety glasses
- hearing protection
- drill
- circular saw
- jigsaw
- nailer
Step-by-step Instructions
Step 1
Cut the legs out with a jigsaw at the bottom.
Step 2
Attach legs to seat. Preferred way to attach is with 3/4" pocket holes and 1-1/4" pocket hole screws. You can also attach with screws from top as well.
Step 3
Attach seat aprons to legs and seat sides with glue and nails or screws. The aprons help support the seat and keep the legs from splaying out.
Finishing
Sand all surfaces, starting with a medium grit and finishing with fine. Wipe off the dust, fill any holes or gaps with wood filler, and sand smooth once dry. Apply primer if you're painting, then finish with your choice of paint or stain and seal with a durable clear topcoat. For outdoor projects, use exterior-rated primer, paint or stain, and sealer so the piece stands up to the weather.
Source (temporary): https://www.ana-white.com/woodworking-projects/primitive-bench