Pub Table height stool, modern design
Pub Table Height Stools with a modern design
Specifications
| Project type | Stools |
|---|---|
| Room | dining room |
| Style | Modern Style Furniture Plans |
| Difficulty | Intermediate |
| Estimated cost | $50 - $100 |
Shopping List
(2) 1 x 3 x 6' oak
(2) 1 x 2 x 8' oak
(1) 1 x 6 x 2' oak
1 pack fine thread Kreg screws 1 1/4"
Wood glue (if wanted for extra durability)
Cut List
(2) 1 x 6 x 12 1/4" (top middle)
(2) 1 x 2 x 12 1/4" (top sides)
(2) 1 x 2 x 14" (top sides)
(4) 1 x 2 x 23 1/2" (legs)
(4) 1 x 3 x 23 1/2" (legs)
(2) 1 x 2 x 9" (base top sides)
(2) 1 x 2 x 9 3/4" (base top sides)
(2) 1 x 3 x 9" (base bottom sides)
(2) 1 x 3 x 9 3/4" (base bottom sides)
Tools
- measuring tape
- square
- pencil
- kreg-jig
- drill
- compound miter saw
- sander
- countersink drill bit
Step-by-step Instructions
Making the top - refer to the picture of the top
Attach the two 1 x 6 x 12 1/4" pieces together. -Then attach the two pieces 1 x 2 12 1/4 on each side of those pieces. - finish top by attaching the 1 x 2 x 14" pieces to the long sides of the top
Base
Attach (1) 1 x 2 x 23 1/2" piece lengthwise with a 1 x 3 x 23 1/2" piece (due this for all for legs. You can use wood glue here or by countersinking a screw as I have done Then be careful for the next couple steps with the dimensional pieces we cut.... -attach a 1 x 2 x 9" piece to the top side of the 1 x 2 x 23 1/2" - attach a 1 x 3 x 9" piece to the bottom side (4 inches up) of the 1 x 2 x 23 1/2" -attach a 1x 2 x 9 3/4" pice to the top side of the 1 x 3 x 23 1/2 side of the leg - attache a 1 x 3 x 9 3/4 piece to the bottom side (4 inches up) of the 1 x 3 x 23 1/2" side of the leg repeat those steps to make the base as seen in the last picture
Step 3
attach the top piece to the base ( i used the kreg jig to make a pocket hole in each corner leg)
Step 4
stain, or paint and then protect
Finishing
Sand all surfaces, starting with a medium grit and finishing with fine. Wipe off the dust, fill any holes or gaps with wood filler, and sand smooth once dry. Apply primer if you're painting, then finish with your choice of paint or stain and seal with a durable clear topcoat. For outdoor projects, use exterior-rated primer, paint or stain, and sealer so the piece stands up to the weather.
Source (temporary): https://www.ana-white.com/woodworking-projects/pub-table-height-stool-modern-design