Quick & Easy 2-Tier Shoe Rack
Build this simple two-tier shoe rack with just one 2x2 and two 1x3 boards —inexpensive furring strips work great! It’s a quick, beginner-friendly build with plenty of room for everyday shoes. Simple construction, minimal lumber, and a clean modern look make this an easy weekend project for an entryway, mudroom, or closet.
Specifications
| Project type | Bookshelf and Bookcase Plans |
|---|---|
| Room | Entryway and Mudroom |
| Difficulty | Beginner Projects |
Dimensions
Use the size-specific shopping and cut lists below.
Shopping List
- 1 - 2x2 @ 8 feet long
- 2 - 1x3 @ 8 feet long
- 24 - 1-3/4" self tapping star bit screws
- 8 - 2-1/2" self tapping star bit screws
- wood filler
- wood glue
- sandpaper
- finishing supplies
Cut List
- 4 - 2x2 @ 11-1/2"
- 4 - 2x2 @ 12" - legs
- 6 - 1x3 @ 31-3/4" - shelf slats (shown as 32" in plans, reduced by 1/4" to allow for saw blade kerf)
Tools
- measuring tape
- square
- pencil
- safety glasses
- drill
- circular saw
Step-by-step Instructions
Step 1
Step 2
Step 3
Step 4
Finishing
Sand all surfaces, starting with a medium grit and finishing with fine. Wipe off the dust, fill any holes or gaps with wood filler, and sand smooth once dry. Apply primer if you're painting, then finish with your choice of paint or stain and seal with a durable clear topcoat. For outdoor projects, use exterior-rated primer, paint or stain, and sealer so the piece stands up to the weather.
Source (temporary): https://www.ana-white.com/woodworking-projects/quick-easy-2-tier-shoe-rack-just-3-boards