Reclaimed Soda Crate Caddy
Inspired by vintage soda crates, this flatware caddy was made from reclaimed food pallets. You can make this crate with new boards too. This easy project features a sturdy handle and four cubbies, suitable for bottles, gardening tools, or even a wedding centerpiece.
Specifications
| Project type | Crate Plans and Projects Made with Crates |
|---|---|
| Room | Storage Solutions |
| Style | Farmhouse Furniture |
| Difficulty | Intermediate |
| Estimated cost | free |
Dimensions
Use the size-specific shopping and cut lists below.
Step-by-step Instructions
Step 1
Cut the handle as shown above from the 1x8. I used a hole saw kit and drilled two 1" holes, and then cutout between the two holes with a jigsaw. For the angled tops, I simply clipped the corners at 45 degrees off square, and then rounded the top edge with the jigsaw.
Step 2
Next attach the sides to the handle piece. Use glue and 2" finish nails (nailer would make this go so fast).
Step 3
Attach the remaining sides in the same method.
Step 4
Now the bottom. Just tack on with finish nails and glue.
Step 5
Finishing
Sand all surfaces, starting with a medium grit and finishing with fine. Wipe off the dust, fill any holes or gaps with wood filler, and sand smooth once dry. Apply primer if you're painting, then finish with your choice of paint or stain and seal with a durable clear topcoat. For outdoor projects, use exterior-rated primer, paint or stain, and sealer so the piece stands up to the weather.
Source (temporary): https://www.ana-white.com/woodworking-projects/reclaimed-soda-crate-caddy