FindWoodPlansWoodworking Plans
Home/Tables

Side Table [Modern Farmhouse Collection]

Build your own Modern Farmhouse Side table with off the shelf lumber and basic power tools. Our step by step plans make it easy. Can also be used as a nightstand or bedside table. Check out the matching coffee table, console table and other plans in this collection.

Side Table [Modern Farmhouse Collection]

Specifications

Project typeSide and End Table Plans
Roomliving room
StyleFarmhouse Furniture
DifficultyBeginner Projects

Dimensions

Use the size-specific shopping and cut lists below.

Side Table [Modern Farmhouse Collection] dimension diagram 1

Shopping List

  • 1 - 1x10 @ 8 feet long
  • 2 - 1x4 @ 8 feet long
  • 2 - 2x4 @ 8 feet long

Cut List

  • 4 - 1x10 @ 23-3/4"
  • 4 - 1x4 @ ~18-1/2"
  • 4 - 1x4 @ ~25-1/4"
  • 2 - 2x4 @ ~18-1/2"
  • 4 - 2x4 @ 17"
  • 8 - 2x4 @ 5-1/2" - long point to long point measurement, both ends cut at 45 degrees off square, ends NOT parallel

Tools

  • measuring tape
  • square
  • pencil
  • safety glasses
  • hearing protection
  • kreg-jig
  • drill
  • compound miter saw
  • nailer
  • sander

Step-by-step Instructions

1

Cut the 1x10 into four pieces, each 23-3/4" long.

Either glue and let dry or use 3/4" pocket holes and 1-1/4" pocket hole screws to attach two together on long edge. Measure the depth and cut 1x4 to match - should be about 18-1/2". Attach with 1-1/4" brad nails and wood glue.

Side Table [Modern Farmhouse Collection] — step 1
2

Measure and cut the 1x4 sides to fit the open sides.

Attach with 1-1/4" brad nails and glue.

Side Table [Modern Farmhouse Collection] — step 2
3

Step 3

Build the 2x4 leg sets with 2" brad nails and glue.

Side Table [Modern Farmhouse Collection] — step 3
4

Step 4

Attach inside the upper shelf.

Side Table [Modern Farmhouse Collection] — step 4
5

Step 5

Attach open ends of the 2x4 legs to the bottom shelf with screws (preferably) or nails.

Side Table [Modern Farmhouse Collection] — step 5
6

Step 6

Make sure the legs are attached level, then attach the cross braces at 45 degrees.

Side Table [Modern Farmhouse Collection] — step 6
7

Finishing

Sand all surfaces, starting with a medium grit and finishing with fine. Wipe off the dust, fill any holes or gaps with wood filler, and sand smooth once dry. Apply primer if you're painting, then finish with your choice of paint or stain and seal with a durable clear topcoat. For outdoor projects, use exterior-rated primer, paint or stain, and sealer so the piece stands up to the weather.

Source (temporary): https://www.ana-white.com/woodworking-projects/side-table-modern-farmhouse-collection