Simple 2x Lumber Hall Tree

This easy to build 2x4 hall tree has lots of hooks and a sturdy bench. It can work indoors or out! This is an expensive and quick project with a rustic feel. Build it with including step by step diagrams, shopping and cut lists.

Specifications

Project type	Bench
Room	Entryway and Mudroom
Difficulty	Intermediate

Dimensions

Use the size-specific shopping and cut lists below.

Simple 2x Lumber Hall Tree dimension diagram 1

Shopping List

6 - 2x4 @ 8 feet long
2 - 2x6 @ 8 feet long
30 - 2-3/4" self tapping wood screws (for attaching seat boards to frame and top to frame)
50 - 2-1/2" pocket hole screws
6 - coat hooks
Cup hooks (I used 11) optional for keys, sunglasses etc

Cut List

2 - 2x4 @ 72" - Back Legs
2 - 2x4 @ 16-1/2" - Front Legs
2 - 2x4 @ 14" - Side Aprons
6 - 2x4 @ 44" - Front Apron, Back Supports, Back Seat Board
2 - 2x4 @ 22-5/8" - Both ends cut at 45 degrees, long point to long point measurement, ends perpendicular - Cross Supports
1 - 2x4 @ 18" - Center Seat Support
4 - 2x6 @ 48" - Seat, Top

Tools

measuring tape
square
pencil
safety glasses
hearing protection
kreg-jig
drill
compound miter saw
sander

Step-by-step Instructions

Step 1

Drill two 1-1/2" pocket holes on each end of the side apron boards. Attach side aprons to front and back legs. Repeat, but in mirror, for second leg set - keeping in mind that pocket holes should be hidden on inside of bench. Use glue and 2-1/2" pocket holes for attaching.

Step 2

Drill two 1-1/2" pocket holes on each end of five of the 44" long 2x4s. Attach with pocket holes facing backwards to the legs with glue and 2-1/2" pocket hole screws.

Step 3

Drill two 1-1/2" pocket holes on each end of the 45 degree cross support and center seat support. Attach to bench with 2-1/2" pocket hole screws and wood glue.

Step 4

Attach seat boards and top with self tapping 2-3/4" wood screws and glue.

Step 5

Finishing

Sand all surfaces, starting with a medium grit and finishing with fine. Wipe off the dust, fill any holes or gaps with wood filler, and sand smooth once dry. Apply primer if you're painting, then finish with your choice of paint or stain and seal with a durable clear topcoat. For outdoor projects, use exterior-rated primer, paint or stain, and sealer so the piece stands up to the weather.

Source (temporary): https://www.ana-white.com/woodworking-projects/simple-2x-lumber-hall-tree