Simple 2x2 Shoe Rack
Build a simple, sturdy shoe rack using only 2x2 boards! Customize the length to fit your entryway or closet, and build additional racks to stack for more storage. This beginner-friendly project can cost as little as $10–$15 to make.
Specifications
| Project type | Storage Woodworking Plans |
|---|---|
| Room | Closets |
| Difficulty | Starter Projects |
Dimensions
Use the size-specific shopping and cut lists below.
Shopping List
- 1 - 2x2 @ 8 feet long
- 8 - 2-1/2" self tapping screws or pocket hole screws
- wood glue
- wood stain
Cut List
- 2 - 2x2 @ 8" - feet
- 4 - 2x2 @ 5" - legs
- 2 - 2x2 @ 29-1/2" - tops
Tools
- measuring tape
- square
- pencil
- safety glasses
- drill
- compound miter saw
Step-by-step Instructions
Step 1
Step 2
Pocket Hole Technique
• -Set pocket hole jig and drill bit collar to the 1-1/2" setting • on the leg 2x2 pieces (5-1/2" long), drill one pocket hole facing up, and one facing down, on the same side of the leg • attach the leg to the longest 2x2s, so the pocket holes are all on the same side • attach the legs to the bottom piece, with pocket holes oriented to the back side, so not visible from the front
Finishing
Sand all surfaces, starting with a medium grit and finishing with fine. Wipe off the dust, fill any holes or gaps with wood filler, and sand smooth once dry. Apply primer if you're painting, then finish with your choice of paint or stain and seal with a durable clear topcoat. For outdoor projects, use exterior-rated primer, paint or stain, and sealer so the piece stands up to the weather.
Source (temporary): https://www.ana-white.com/woodworking-projects/simple-2x2-shoe-rack-easy-diy-plans