Simple Adirondack Side Table
Free outdoor side table plans. This is a beginner friendly project plan with step by step diagrams, shopping and cut list
Specifications
| Project type | Side and End Table Plans |
|---|---|
| Room | Outdoor |
| Style | Cottage Style Furniture Plans |
| Difficulty | Beginner Projects |
| Estimated cost | Under $20 |
Dimensions
Use the size-specific shopping and cut lists below.
Shopping List
- 2 - 1x3 @ 8 feet long
- 1 - 1x4 @ 8 feet long
- 1 1/4" exterior deck screws
Cut List
- 2 - 1x3 @ 14 1/2"
- 3 - 1x3 @ 15"
- 4 - 1x3 @ 16 1/4"
- 5 - 1x4 @ 18 1/2"
Tools
- measuring tape
- square
- pencil
- safety glasses
- hearing protection
- drill
- circular saw
- countersink drill bit
Step-by-step Instructions
Step 1
First, build the basic table frame. You can attach boards in different ways, the easiest is just using a countersink bit to drill holes and attach with screws and glue. Alternatively (Kreg jig users) you can use 3/4" pocket holes and 1 1/4" pocket hole screws.
Step 2
Attach legs to outside of frame as shown in diagram.
Step 3
Mark the tabletop boards and place on top of the tabletop. Predrill holes and attach - overhangs are shown in next diagram...
Step 4
Enjoy your side table!!!
Finishing
Sand all surfaces, starting with a medium grit and finishing with fine. Wipe off the dust, fill any holes or gaps with wood filler, and sand smooth once dry. Apply primer if you're painting, then finish with your choice of paint or stain and seal with a durable clear topcoat. For outdoor projects, use exterior-rated primer, paint or stain, and sealer so the piece stands up to the weather.
Source (temporary): https://www.ana-white.com/woodworking-projects/simple-adirondack-side-table