Simple Double Shoe Rack
Build a simple double shoe rack using only 2x2 boards! Two open rail shelves organize everyday shoes, while the floor underneath provides space for a third row. Customize the length to fit your entryway, mudroom or closet. This is an easy, inexpensive beginner woodworking project.
Specifications
| Project type | Storage Woodworking Plans |
|---|---|
| Room | Entryway and Mudroom |
| Difficulty | Starter Projects |
Dimensions
Use the size-specific shopping and cut lists below.
Shopping List
- 2 - 2x2 @ 8 feet long
- 12 - 2-1/2" self tapping screws or pocket hole screws
- wood glue
- wood stain
- medium grit sanding paper
Cut List
Cut list is for 29" wide shelf, with all cuts fitting on two 8' 2x2 boards. Make longest cuts first to ensure all cuts fit on the boards
- 2 – 29" top rails*
- 2 – 26" middle rails*
- 4 – 15" legs
- 2 – 8" feet
Adjust these lengths for longer or shorter shoe rack
Tools
- measuring tape
- square
- pencil
- safety glasses
- drill
Step-by-step Instructions
Step 1
Build two identical frames as shown with the top and legs, hiding all pocket holes on back side (if using pocket holes)
Step 2
Attach the frames from step 1 to the feet, hiding all pocket holes on the back side (if using)
Step 3
Add the middle shelves, hide pocket holes on bottom (if using).
Finishing
Sand all surfaces, starting with a medium grit and finishing with fine. Wipe off the dust, fill any holes or gaps with wood filler, and sand smooth once dry. Apply primer if you're painting, then finish with your choice of paint or stain and seal with a durable clear topcoat. For outdoor projects, use exterior-rated primer, paint or stain, and sealer so the piece stands up to the weather.
Source (temporary): https://www.ana-white.com/woodworking-projects/simple-double-shoe-rack-easy-2x2-diy-plans