Simple Open Farmhouse Style Vanity
With raised sinks so popular these days, why not save some money and create a open vanity? You can add a shelf under the sink or even rolling laundry bins. This simple plan can be easily scaled to any space. Special thanks to our readers for sharing their photos.

Specifications
| Project type | Bathroom Furniture |
|---|---|
| Room | Bathroom |
| Difficulty | Beginner Projects |
| Estimated cost | $20 - $50 |
Dimensions
Use the size-specific shopping and cut lists below.

Shopping List
2 – above mount sinks, approximately 18″ wide x 15″ deep
1 – 4x4 - 10 feet long
1 – 1×6 - 12 feet long
1 – 1×3 Boards, you will only need less than 12″
Plywood or project panel 60″ x 18″ or make a tabletop out of two 1x10 boards, 60" long
2 1/2″ screws
Wood Glue
Wood Filler
Paint and Sealant
Cut List
A) 4 – 4×4 @ 29 1/4″ (Legs)
B) 4 – 1×3 @ 5 1/2″ (Spacers)
C) 2 – 1×6 @ 10″ (Side Aprons)
D) 2 – 1×6 @ 15 1/4″ (Top Side Supports)
E) 2 – 1×6 @ 49″ (Front and Back Aprons)
Tools
- measuring tape
- square
- pencil
- safety glasses
- hearing protection
- kreg-jig
- circular saw
- nailer
- sander
Step-by-step Instructions
Step 1
Spacer. Fasten the spacer to the legs, as shown above. Use the 2 1/2″ screws and glue.

Step 2
Side Apron. Fasten the side apron to the spacers, as shown above.

Step 3
Top Support. Fasten the top support, as shown above. Notice the front and back of the support will have a different position on the legs. This is important, because you want your back apron to sit flush with the backs of the legs, and then the back of the wall behind the vanity. You can also choose to secure the vanity to the wall through this back apron.

Step 4
Front and Back Aprons. Fasten the front and back aprons in place.

Step 5

Finishing
Sand all surfaces, starting with a medium grit and finishing with fine. Wipe off the dust, fill any holes or gaps with wood filler, and sand smooth once dry. Apply primer if you're painting, then finish with your choice of paint or stain and seal with a durable clear topcoat. For outdoor projects, use exterior-rated primer, paint or stain, and sealer so the piece stands up to the weather.
Source (temporary): https://www.ana-white.com/woodworking-projects/simple-open-farmhouse-style-vanity