FindWoodPlansWoodworking Plans
Home/Tables

Simple Rustic Table

A beautiful, easy to build table that features a 1x top simple legs. This table is designed to look like something one might find and treasure. Step by step plans from

Simple Rustic Table

Specifications

Project typeDining Table Plans
RoomCraftroom
StyleFarmhouse Furniture
DifficultyBeginner Projects
Estimated cost$20 - $50

Dimensions

Use the size-specific shopping and cut lists below.

Simple Rustic Table dimension diagram 1

Shopping List

  • 4 – 2x2s, 8′ Long
  • 3 – 1×4, 8′ Long
  • 4 – 1×10, 8′ Long
  • 1 – 4×4, 10′ Long
  • 2″ self tapping wood screws (star bit)
  • 1 1/4″ self tapping wood screws (star bit)
  • (16) 3" long self tapping wood screws (star bit) for attaching legs
  • wood glue
  • wood filler
  • sand paper

Cut List

  • 2 – 1×4 @ 90 1/2″ (Side Aprons)
  • 2 – 1×4 @ 36″ (End Aprons)
  • 8 – 2×2 @ 34 1/2″ (Under Tabletop Supports)
  • 4 – 1×10 @ 96″ (Tabletop Pieces)
  • 4 – 4×4 @ 29 1/4″ (Legs)
  • 4 – 2×2 @ 12″, ends mitered at 45 degrees (cross supports)

Tools

  • measuring tape
  • square
  • pencil
  • safety glasses
  • hearing protection
  • drill
  • circular saw

Step-by-step Instructions

1

Step 1

Table Top Supports and Apron. Build the tabletop supports and aprons as shown above. The supports are spaced 10″ apart. Use 2″ screws and glue, countersinking the screws.

Simple Rustic Table — step 1
2

Step 2

Tabletop Pieces. Take a square of the tabletop. Then find the centers of the tabletop supports and the end aprons and mark. Line up the center tabletop pieces with these marks and fasten through the bottom using 2″ screws and glue. Minimize the gap between the tabletop boards as you go.

Simple Rustic Table — step 2
3

Step 3

Tabletop Screw Hole Patterns. Mark out the screw holes on the tops of the table as shown above. Then predrill and screw the tabletop pieces to the end aprons. Make sure the table is square prior to doing this. Use the 2″ screws and glue.

Simple Rustic Table — step 3
4

Step 4

Legs. Fasten the 4x4 legs to the aprons from the outsides with the longer screws. Do not use glue if you would like the legs removable.

Simple Rustic Table — step 4
5

Step 5

Simple Rustic Table — step 5
6

Finishing

Sand all surfaces, starting with a medium grit and finishing with fine. Wipe off the dust, fill any holes or gaps with wood filler, and sand smooth once dry. Apply primer if you're painting, then finish with your choice of paint or stain and seal with a durable clear topcoat. For outdoor projects, use exterior-rated primer, paint or stain, and sealer so the piece stands up to the weather.

Source (temporary): https://www.ana-white.com/woodworking-projects/simple-rustic-table