FindWoodPlansWoodworking Plans
Home/Tables

Simplest Adirondack Outdoor Coffee Table

to build an Adirondack coffee table - this is out simplest plan for an outdoor coffee table! Just cut and screw together - no nails, no pocket holes! Also check out our Outdoor Finishing Guide and all our Outdoor Furniture Plans. Build the matching Adirondack Chairs here.

Simplest Adirondack Outdoor Coffee Table

Specifications

Project typeCoffee Tables
RoomOutdoor
StyleFarmhouse Furniture
DifficultyBeginner Projects
Estimated costUnder $20

Dimensions

Use the size-specific shopping and cut lists below.

Simplest Adirondack Outdoor Coffee Table dimension diagram 1

Shopping List

  • 3 - 1x4 @ 8 feet long
  • 2 - 2x4 @ 10 feet long
  • 2 1/2” exterior screws
  • 2” exterior deck screws or galvanized finish nails (for nailing top down)

Cut List

  • 2 - 2x4 @ 44 1/2” (side aprons)*
  • 3 - 2x4 @ 20 1/2” (end aprons)
  • 4 - 2x4 @ 15 1/4” (legs)
  • 6 - 1x4 @ 47 1/2” (tabletop)

* *NOTE: I took 1/2” off these measurements to conserve board use. Cut list is correct.

Tools

  • measuring tape
  • square
  • pencil
  • safety glasses
  • hearing protection
  • drill
  • circular saw
  • countersink drill bit

Step-by-step Instructions

1

Step 1

Attach long aprons to shorter aprons by predrilling holes with the countersink bit and screwing 2 1/2” exterior screws into predrilled holes. Take a second to check for square by measuring diagonally from corner to corner and adjusting so diagonal measurements are the same. I recommend adding an additional 2x4 support (20 1/2" long and in cut list) to the center - attaching exactly as you do the end aprons.

Simplest Adirondack Outdoor Coffee Table — step 1
2

Step 2

Clamp legs to frame and predrill 4 holes (in pattern for a better looking product) to the apron.

Simplest Adirondack Outdoor Coffee Table — step 2
3

Step 3

Drill two holes with countersink bit on each end of each board, 2 1/4” in. Attach through predrilled holes with deck screws and exterior wood glue. Alternatively, you can use glue and galvanized finish nails

Simplest Adirondack Outdoor Coffee Table — step 3
4

Finishing

Sand all surfaces, starting with a medium grit and finishing with fine. Wipe off the dust, fill any holes or gaps with wood filler, and sand smooth once dry. Apply primer if you're painting, then finish with your choice of paint or stain and seal with a durable clear topcoat. For outdoor projects, use exterior-rated primer, paint or stain, and sealer so the piece stands up to the weather.

Source (temporary): https://www.ana-white.com/woodworking-projects/simplest-adirondack-outdoor-coffee-table