Smaller Rolling Storage Cart

Step 1

I recommend doing the shelves first (lessons learned!) so you can measure the shelf, and make the ladder frame piece to fit. So attach 1x3s to the sides of the 1x12s with glue and 1-1/4" nails or staples. Pocket hole lovers can also attach from underside with 3/4" pocket holes and 1-1/4" pocket hole screws.

Step 2

Measure and cut to fit the side 1x3s, and attach as you did in step 1.

Step 3

Measure the length of the shelves, and cut the 3 - 1x3 "rungs" to this length (I'd cut a hair longer so it's easy to slide your shelves in. Construct the frame.

Step 4

Position the shelves inside the frame, and attach on underside with 1-1/4" screws and glue. I also attached to side frame with nails and glue for added support.

Step 5

Finishing

Sand all surfaces, starting with a medium grit and finishing with fine. Wipe off the dust, fill any holes or gaps with wood filler, and sand smooth once dry. Apply primer if you're painting, then finish with your choice of paint or stain and seal with a durable clear topcoat. For outdoor projects, use exterior-rated primer, paint or stain, and sealer so the piece stands up to the weather.