Stackable 1x Board Shoe Rack
Build this simple 32-inch-wide shoe rack using inexpensive 1x8 and 1x4 boards. Use one shelf on its own or stack multiple identical units to create customizable shoe storage for an entryway, closet, or mudroom. from Efficient, Optimized Design We value your money, and optimized this design so it has minimal scrap wood waste. You'll need two feet of 1x8 boards and eight feet of 1x4 boards per stackable shelf. Quick Build Video for THIS Project
Specifications
| Project type | Entryway Furniture |
|---|---|
| Room | Entryway and Mudroom |
| Difficulty | Starter Projects |
Dimensions
Use the size-specific shopping and cut lists below.
Shopping List
- 1 - 1x8 @ 24"
- 1 - 1x4 @ 8 feet long
- 1-1/4" pocket hole screws or 1-1/4" brad nails or 1-3/4" self tapping star bit screws
- wood glue
- medium grit sanding paper
- wood stain or paint
Cut List
- 2 - 1x8 @ 12" (or up to 14")
- 3 - 1x4 @ 31-3/4"
Tools
- measuring tape
- square
- pencil
- safety glasses
- drill
- circular saw
Step-by-step Instructions
Step 1
Step 2
Finishing
Sand all surfaces, starting with a medium grit and finishing with fine. Wipe off the dust, fill any holes or gaps with wood filler, and sand smooth once dry. Apply primer if you're painting, then finish with your choice of paint or stain and seal with a durable clear topcoat. For outdoor projects, use exterior-rated primer, paint or stain, and sealer so the piece stands up to the weather.
Source (temporary): https://www.ana-white.com/woodworking-projects/stackable-1x-board-shoe-rack-free-diy-plans