Stackable Wood Cake Stand
Display your cake and cupcakes with this easy to build wood cake stand plan. Featuring two tiers with no overhangs, these wood cake stands nest together for storage, and can be used as risers individually or stacked. Using pine 1x4s, create a rustic display for cakes and cupcakes. from Related: 1x3 Cake Stand Plans (not as tall and less expensive to build)
Specifications
| Project type | Kitchen Cabinet Plan, Accessories and Serving |
|---|---|
| Room | kitchen |
| Difficulty | Starter Projects |
Dimensions
Use the size-specific shopping and cut lists below.
Shopping List
Smaller Cake Stand
- 1 - 1x4 @ 6 feet long
- 1-1/4" brad nails
- wood glue
- wood stain
Larger Cake Stand
- 1 - 1x4 @ 6 feet long
- 1 - 1x4 @ 8 feet long
- 1-1/4" brad nails
- wood glue
- wood stain
Cut List
Smaller Cake Stand
- 2 - 1x4 @ 9"
- 2 - 1x4 @ 10-1/2"
- 3 - 1x4 @ 10-1/2"
Larger Cake Stand
- 2 - 1x4 @ 16"
- 2 - 1x4 @ 17-1/2"
- 5 - 1x4 @ 17-1/2"
Tools
- measuring tape
- pencil
- safety glasses
- circular saw
- nailer
- sander
Step-by-step Instructions
Step 1
Use 1-1/4" brad nails and wood glue to build the bases for the cake stands. Three nails with glue per corner is good. Adjust so the frames are square.
Layout the top decking boards on top.
Attach to base with 1-1/4" brad nails and glue, around the entire perimenter.
Finishing
Sand all surfaces, starting with a medium grit and finishing with fine. Wipe off the dust, fill any holes or gaps with wood filler, and sand smooth once dry. Apply primer if you're painting, then finish with your choice of paint or stain and seal with a durable clear topcoat. For outdoor projects, use exterior-rated primer, paint or stain, and sealer so the piece stands up to the weather.
Source (temporary): https://www.ana-white.com/woodworking-projects/stackable-wood-cake-stand-plans