Stair Baluster Outdoor Console Table
to build an outdoor console table using stair balusters for legs!
Specifications
| Project type | Console Table Plans |
|---|---|
| Room | Outdoor |
| Style | Farmhouse Furniture |
| Difficulty | Intermediate |
Dimensions
Use the size-specific shopping and cut lists below.
Shopping List
4 - Stair Balusters (as shown 34" tall x 1 1/4" x 1 1/4")
2 - 1x3 @ 8 feet long
5 - 1x4 @ 8 feet long
1 1/4" pocket hole screws
exterior wood glue
Cut List
19 - 1x4 @ 9" long
2 - 1x4 @ 39 1/2" long
2 - 1x3 @ 35 1/2" long
4 - Stair Balusters (as shown 34" tall x 1 1/4" x 1 1/4")
2 - 1x4 @ 11 1/2" (top aprons)
2 - 1x4 @ 33" (top aprons)
2 - 1x3 @ 11 1/2" (bottom aprons)
2 - 1x3 @ 33" (bottom aprons)
Tools
- measuring tape
- square
- pencil
- safety glasses
- hearing protection
- kreg-jig
- drill
- circular saw
- sander
Step-by-step Instructions
Step 1
Build the top as shown here. Clamp each joint as you attach to get the smoothest top.
Step 2
Build bottom shelf, only this time, notch out for legs.
Step 3
Start by attaching end aprons to the two legs each. Then attach front/back aprons to the two leg sets. Don't forget to drill pocket holes in aprons facing upward for attaching tabletops in later steps.
Step 4
Attach top and shelves to frame.
Finishing
Sand all surfaces, starting with a medium grit and finishing with fine. Wipe off the dust, fill any holes or gaps with wood filler, and sand smooth once dry. Apply primer if you're painting, then finish with your choice of paint or stain and seal with a durable clear topcoat. For outdoor projects, use exterior-rated primer, paint or stain, and sealer so the piece stands up to the weather.
Source (temporary): https://www.ana-white.com/woodworking-projects/stair-baluster-outdoor-console-table