Tryde Coffee Table
Build your own coffee table - this uses basic tools and simple techniques and framing lumber to create a gorgeous coffee table! With lots of reader submitted photos, cut lists and shopping lists, make this your next project! from
Specifications
| Project type | Coffee Tables |
|---|---|
| Room | living room |
| Style | Farmhouse Furniture |
| Difficulty | Intermediate |
| Estimated cost | scraps |
Dimensions
Use the size-specific shopping and cut lists below.
Shopping List
- 2 - 2x6 @ 8 feet long
- 1 - 4x4 @ 6 feet long
- 2 - 2x4 @ 8 feet long
- About 75 2-1/2" long self tapping star bit screws
- wood glue
Cut List
- 4 - 2x6 @ 41" - tabletop Atta
- 2 - 2x4 @ About 22" - breadboard ends, cut to fit
- 2 - 2x4 @ 14" - end aprons
- 4 - 4x4 @ 16" - legs
- 2 - 2x4 @ 38" - side aprons
Tools
- measuring tape
- square
- pencil
- safety glasses
- kreg-jig
- drill
- jigsaw
- compound miter saw
- sander
Step-by-step Instructions
Cut the 2x6 boards to exactly match in length.
Drill pocket holes on the ends of all the 2x6 boards. On three of the 2x6 boards, drill pocket holes to attach together edge to edge. Attach with 2-1/2" pocket hole screws and glue. Avoid overtightening the pocket hole screws as this can make the tabletop curve inward.
Measure the width of the four 2x6 boards and cut 2x4 breadboard ends to match.
Attach through the predrilled pocket holes with 2-1/2" pocket hole screws.
Step 3
Prepare the 2x4 aprons by drilling 1-1/2" pocket holes as shown in diagrams. Note the pocket holes facing upward for attaching the tabletop in later steps (highlighted in red) Attach to the two legs. Build two identical.
Step 4
Repeat for the longer side aprons.
Center the base on the underside of the tabletop.
Attach base to tabletop through predrilled pocket holes with 2-1/2" pocket hole screws.
Finishing
Sand all surfaces, starting with a medium grit and finishing with fine. Wipe off the dust, fill any holes or gaps with wood filler, and sand smooth once dry. Apply primer if you're painting, then finish with your choice of paint or stain and seal with a durable clear topcoat. For outdoor projects, use exterior-rated primer, paint or stain, and sealer so the piece stands up to the weather.
Source (temporary): https://www.ana-white.com/woodworking-projects/tryde-coffee-table