Welly Boot Rack
If you're tired of messy and disorganized wellington boots cluttering up your space, you're in the right place. Our step-by-step guide will help you create a practical and stylish boot rack that keeps your boots neatly organized. With this easy-to-follow tutorial, you'll learn how to construct a welly boot rack using simple materials and basic tools. Not only will this project save you time and frustration, but it will also add a touch of charm to your home. So, let's dive in and get those wellies organized! This free step by step tutorial has a shopping list, cut list, diagrams and lots of photos to guide you - Designed and built by @family_diynamic
Specifications
| Project type | Outdoor Projects |
|---|---|
| Room | Outdoor |
| Difficulty | Starter Projects |
| Estimated cost | $20 - $50 |
Dimensions
Use the size-specific shopping and cut lists below.
Shopping List
- 4 - 4 foot long dowels in 7/8" diameter
- 1 - 2x3x8'
- 7/8" spade bit
- pilot hole drill bit
- 2-1/2" self tapping star bit screws (about 20 per boot rack)
- wood glue
Cut List
Dowels - You'll get 3 cuts out of one dowel at 18", 18" and 12"
- 6 @ 12"
- 6 @ 18"
Frame - cut from 2x3s
- 2 - 2x3 @ 30"
- 2 - 2x3 @ 14"
Tools
- measuring tape
- pencil
- safety glasses
- drill
- compound miter saw
Step-by-step Instructions
Step 1
Mark the location of the dowels on the 30" 2x3s.
Drill pilot holes all the way through.
What is a pilot hole? It's just a small hole drilled for screws, the hole diameter should be about the size of your screw shaft. Then tape your 7/8" drill bit 3/4" up from the tip, and drill over the pilot hole, 3/4" deep.
Apply glue inside the hole and insert dowel.
Secure from bottom with screws through the pilot hole.
Step 4
Here's the two rows of dowels prepped - the longer dowels are all on the back row, the shorter dowels are on the front row.
Step 5
Attach the two rows of dowels with the remaining 2x3s as shown.
Finishing
Sand all surfaces, starting with a medium grit and finishing with fine. Wipe off the dust, fill any holes or gaps with wood filler, and sand smooth once dry. Apply primer if you're painting, then finish with your choice of paint or stain and seal with a durable clear topcoat. For outdoor projects, use exterior-rated primer, paint or stain, and sealer so the piece stands up to the weather.
Source (temporary): https://www.ana-white.com/woodworking-projects/welly-boot-rack