Wood Crate Keurig K Cup Holder Drawer
A beautiful wood crate that holds your beloved Keurig and stores all the coffees! Free DIY
Specifications
| Project type | Kitchen Cabinet Plan, Accessories and Serving |
|---|---|
| Room | dining room |
| Style | Cottage Style Furniture Plans |
| Difficulty | Beginner Projects |
| Estimated cost | Under $20 |
Dimensions
Use the size-specific shopping and cut lists below.
Shopping List
10 feet of 8' long 1x2s
1/2" plywood scrap at least 15" x 14-1/4" or you can buy a new quarter sheet
Two 1/4" plywood scraps at least 12-1/2" x 15" or you can buy a new half sheet
Cut List
4 - 1x2 @ 5" - legs
4 - 1x2 @ 13-1/2" - sides
2 - 1x2 @ 12-3/4" - back
2 - 1x2 @ 12-1/2" - front
2 - 1/4" thick plywood @ 12-1/2" x 15" - drawer top
1 - 1/2" thick plywood @ 15" x 14-1/4" - top
Tools
- measuring tape
- square
- pencil
- safety glasses
- hearing protection
- drill
- compound miter saw
- nailer
- sander
- hole saw
Step-by-step Instructions
Step 1
Build two of the 1x2 frames.
Step 2
Attach legs to one side.
Step 3
Repeat on remaining side.
Step 4
Attach second row of crate sides.
Step 5
Step 6
Add top.
Finishing
Sand all surfaces, starting with a medium grit and finishing with fine. Wipe off the dust, fill any holes or gaps with wood filler, and sand smooth once dry. Apply primer if you're painting, then finish with your choice of paint or stain and seal with a durable clear topcoat. For outdoor projects, use exterior-rated primer, paint or stain, and sealer so the piece stands up to the weather.
Source (temporary): https://www.ana-white.com/woodworking-projects/wood-crate-keurig-k-cup-holder-drawer